The Duel of the Cameo Silhouette 

vs. the Brother Scan & Cut Part 5 

 

 For those of you who have been following the duel there have been some questions raised about how we created our design, and in my excitement to compare these two products I did leave out some details...so without further ado..

1. The applique design we are using (the bunny) was downloaded from one of the many applique sources available on the web.  You may use any design source, bearing in mind that not all digitizers were created equal (avoid websites that tell you that you HAVE TO USE A FUSIBLE WEB WITH THEIR APPLIQUE DESIGNS) during the machine embroidery process, if you read our applique blog down below you will understand why.

2.  We used a fusible web because we needed to have the cutters "trim the fabric neatly" and a fusible web makes this job easier.  I prefer Steam-a-Seam and Steam-a-Seam lite, I do not care for Heat-n-Bond as it is not designed to embroider thru and I don't care for their 'lite' version as both are stiff and gummy, in my opinion.

3.  What we are actually trying to accomplish is to have the cutters (Brother Scan and Cut and the Cameo) pre-cut our applique pieces before they are put into the machine. This saves trimming around the design while the item is in the hoop and makes things much neater.  

If you followed along so far you know that we converted our pre-made applique design into a cut file and this is what we have so far.

The Duel of the Cameo Silhouette vs. the Brother Scan & Cut Part 4

The Duel of the Cameo Silhouette 

vs. the Brother Scan & Cut Part 4

Here are the completed pieces, it took about 20 seconds to cut these

The Duel of the Cameo Silhouette vs. the Brother Scan & Cut Part 3

The Duel of the Cameo Silhouette 

vs. the Brother Scan & Cut Part 3
Cutting Multiple Pieces

These pieces are cut close to the size of the finished applique so there is less waste when cutting multiple pieces.

Here are the pieces attached to the respective mats, the Cameo mat is clear while the Brother Scan and Cut mat is white, this does make it easier to see the grid and line up things for placement.


Here are the respective mats, each with several fabrics.

The brother mat is a bit easier to work with because it is not clear, the fact that it was white allowed me to better see the grid lines and what I was working with, the other feature I loved was the Brother Scan and Cut scanning feature.  Basically this feature allows to put assorted fabrics on the mat and then 'scan' the mat with a touch of a button...this may not sound so very cool but if you look at the screen it allows me to move the bunny shapes anywhere I like on the mat and to cut where needed...very cool.

The screen is an exact replica of the fabric on the mat.

The Duel of the Cameo Silhouette vs. the Brother Scan & Cut Part 2

The Duel of the Cameo Silhouette 

vs. the Brother Scan & Cut Part 2

Part two of the Brother/Cameo duel will showcase the many differences in these machines to help you make an informed decision when purchasing one...because you will want one.

The Duel of the Cameo Silhouette vs. the Brother Scan & Cut Part 1

The Duel of the Cameo Silhouette 

vs. the Brother Scan & Cut Part 1

This duel came about because I purchased a Brother Scan and Cut along with several friends from our local dealer...and then attempted to use the Brother Scan and Cut Canvas (a cloud based software that allows you to import your SVG files and convert them to FCM which is what the Brother reads).

If you own the Brother Scan and Cut and have not played with the software here is a link to the site, you will need a broadband internet connection as you don't download the software...you use it online.

https://scanncutcanvas.brother.com/en

If you own the Silhouette Cameo machine then you most likely have the Studio Software which is similar to the Canvas but in my opinion a tad more powerful. The education dept. at Brother has received many calls from consumers and educators saying they would like for the Canvas software to do a better job of converting SVG graphic to the language the BSC reads.  To be fair it does convert them, they just don't have a special box to input the size you would like the file to be, that means you have to click and drag to the size you want.  For those of you who have used the Studio software you know that you can just input the size you want and it is very exact.

For those of you that read this far and have no idea what I am talking about let me clear it up.  Both of these machines are 'plotters'.  They cut fabric, vinyl, paper and other media with the use of Scale-able Vector Graphic or SVG's.  You may have recently noticed than many of your favorite embroidery websites are offering SVG's to go with their files.  These files allow the users to cut outdoor or indoor vinyl for banners, cars, flags-these files can also be used to make heat transfer vinyl for t-shirts and most importantly (in my opinion) they can be used to cut all of your applique pieces, meaning you don't have to cut your machine embroidered applique pieces anymore!!!!

YAY!!!